Chassis parts

 Chassis and associated parts 

lightweight gearstick 1/2" misalignment spacer
lightweight gearstick1/2" misalignment spacer

lightweight alloy gearstick , also available in bottom pivot to suit class 5 and 7( please contact us for the saloon option)

 Steel misalignmet spacer for 1/2" bolt

5/8" misalignment spacer Alloy bladed roll bar kit
5/8" misalignment spacer Alloy bladed roll bar kit

steel 5/8" misalignment spacer for 5/8 bolts 

Alloy bladed anti roll bar kit , detachable alloy blades and stainless steel roll bar shaft machined with hex ends for rblade positionoing (customer will have to specify bar width plus angle of blades , as ,made individual for each application)
alloy hose connectors (for 25mm ID hose ) alloy hose jointer (32mm ID hose)
alloy hose connectors (for 25mm ID hose )alloy hose jointer (32mm ID hose)

alloy hose jointers for silicone hose , 25 mm ID  hose , available for any size please contact us for other sizes 

Aluminium hose jointer for 32 mm ID hose , other sizes available please contact us for more information 

Aluminium Rad bracket kit aluminium Uprights ( price per pair )
Aluminium Rad bracket kitaluminium Uprights ( price per pair )

aluminium rad bracket set (4 off) made from 6mm aluminium can be made to your dimensions iff required 

A Pair of bilet aluminium uprights complete with steering arms and stub axles , also drilled and tapped to take caliper brackets (caliper brackets can be supplied to suit your calpers )

Anti roll bar locking rings (per pair) Cable Brackets
Anti roll bar locking rings (per pair)Cable Brackets

Billet aluminium locking rings to fit on 5/8" or 3/4" roll bars to stop the bars moving sideways ,please state size required when ordering (price is per pair) 

billet aluminium bracket that bolts through the panel to hold the outer sleeve of the throttle or clutch cable , simple and easy to mount with two M6 bolts 

Driveshafts front shock bracket kit
Driveshafts front shock bracket kit

Driveshafts made to order any length and most splines , we can do different splines each end to patterns , please contact us for prices and availability 

full kit inc. bolts to allow the mounting of our alloy shock brakets to your own chassis , 6 adjustable holes to allow fine tuning of ride hight of your chassis

front shock clamp kit Fuel Filler Neck
front shock clamp kitFuel Filler Neck

a complete front shock clamp kit , comes complete with two alloy clamps , 2 adjuster rods , 2 chassis brackets , 2 L/H and 2 R/H rose joints so you can adjust the brackets once there fitted to the race car , fits around 32mm CDS tubing

aluminium fuel filler neck for welding to tanks etc.

Hayabusa gen 2 fuel pump mounting plates Junior Special adjustable strut tops
Hayabusa gen 2 fuel pump mounting plates Junior Special adjustable strut tops

aluminium Hayabusa Gen 2 fuel pump mounting plate , weld onto bottom if tank and fit the standard bike fuel pump , has an arrow on it to show the position of the outlet of the tank to ensure you weld it in the way you need it to point 

adjustable strut tops for junior specials , price is per pair 

K&N air filter billet plates Lightweight Gear stick
K&N air filter billet platesLightweight Gear stick
Billet aluminium top and bottom plates for K&N air filters , uses original clips , can be engraved with your logo and the base plates can be machined to fit your throttle bodies or carbs ,(top plate can be purchased on its own ) contact us...

Lightweight billet gearstick 350mm long with 10mm bearing fitted and 6mm hole for cable attachment

lightweight steel pedal set new front upright with radial caliper bracket
lightweight steel pedal setnew front upright with radial caliper bracket

Lightweight steel pedal kit , as used in our pedal boxes 

new front upright with radial caliper bracket to take most motorcycle radial calipers , tapped 5/8 unf each end and takes a 3/8 botl for steering arm 

new upright paddle gearshift
new uprightpaddle gearshift

new lightweight upright ,  tapped 5/8 unf each end for ball joints , uses a 3/8 bolt and spacers ( available separatly) for the steering arm to adjust bump steer ,

billet aluminium paddle shift , 40mm bore to fit most kit car columns , complete with pull bracket that can be swapped left or right to pull cable or actuator 

rear arms rear bearing carriers Mondeo bearings
rear arms rear bearing carriers Mondeo bearings

rear arms , will take our new Mondeo bearing style hubs  , priced per pair (will fit ZFR chassis )

new alloy rear bearing carriers , these take the ford Mondeo bearings and hubs , also fit our sliding mounting plates , will fit ZFR arms ( PRICE IS FOR ONE CARRIER)

rear hub kit Rear shock bracket kit
rear hub kitRear shock bracket kit

rear hub kit , this kit used the new bearing housings and flanges (108mm PCD) the cv flange is to take 100mm cv joints (NOTE THIS IS ONE SIDE ONLY) 

Rear shock bracket kit complete with bolts allowing our alloy adjustable shock brackets to be fitted to your chassis , with 6 adjusting holes allowing for better adjustment of ride hight on your chassis 

Rear Shock Mounts (pair) rear slider plate
Rear Shock Mounts (pair)rear slider plate

rear shock mounts , 50mm center mounting hols 10mm bolt , and 1/2" unf tapped hole for shock bolt (price for a pair)

slider plate to be welded to your rear arms to take out rear bearning carrier ( mondeo type)

Shock Clamps (pair) Shock clamps LONG
Shock Clamps (pair)Shock clamps LONG

billet aluminium shock clamps (pair) , ideal to mount front or rear shocks onto 32mm tube , these come as a pair (one set will mount the top of two shocks)

Billet aluminium shock clamps long , these will fit 32mm dia tube ideal if you need to stand the shoch out 

Shocker Canister Clamps ( Pair for 2 shocks) Side Bar Clamp Set
Shocker Canister Clamps ( Pair for 2 shocks)Side Bar Clamp Set

Aluminium shock canister clamps (sold as a pair to fit 2 shockers ) these are to fit 32 mm tube but can be made to fit any size tube , will hold 2" diamiter canisters (fox etc) can be anodised at extra cost (as pic)

billet side bar clamp sets  (one pair) these are used to clamp the forward facing side bars to the short upright bars to locate rear arms , made for 32mm CDS tube and take a 1/2" rose joint

steering column end Steering Column Mount With Spherical Bearing for 3/4" shaft
steering column endSteering Column Mount With Spherical Bearing for 3/4" shaft

weld on steering colum end for 3/4 columns , fits volvo/ vaux rack joints 

Billet Aluminium steering column mount fitted with 3/4" ID spherical bearing ideal for specials or saloons 

Steering Column Mount With Spherical Bearing for 5/8" shaft steering wheel adapter
Steering Column Mount With Spherical Bearing for 5/8" shaftsteering wheel adapter

Aluminium steering column mount with spherical bearing to take a 5/8" dia shaft

Billet steering wheel adapter to fit OMP type steering wheels to the standard 3 bolt quick release hubs 

threaded shock adjusters ( a pair ) throttle cable mount
threaded shock adjusters ( a pair )throttle cable mount

A pair of 3/4" threaded shock adjusters with aluminium shock holders , standard length is 200mm but can be made any length 

aluminium throttle cable end containing an 8mm bearing allowing the cable to be mounted to a pedal and always pull correctly without twisting , two can be bolted together with a small spacer to work wit twin engine set ups

Universal pedal box 3" NASCAR seat bels
Universal pedal box3" NASCAR seat bels

Universal pedal box , can be mounted on sliders or it has 4 holes to be mounted down

 3 inch wide NASCAR style seat belts

4 mt long universal throttle cable alloy battery box
4 mt long universal throttle cable alloy battery box

4 mt long universal throttle cable with nipple can also be used for clutch cables on bike engined cars and junior specials 

Alloy battery box for red top 25 battery

Alloy Battery Clamp alloy pedal kits
Alloy Battery Clampalloy pedal kits

Alloy  battery clamp for red top 25 battery

Alloy pedal sets , lightweight and simple

Anti roll bar clevis Anti roll bar drop links
Anti roll bar clevisAnti roll bar drop links

anti roll bar clevis , available in 3/4 or 5/8 , please contact us to specify  (price per pair)

 
anti roll bar kit Braided hose kit
anti roll bar kitBraided hose kit

anti roll bar kit ( contact us with your sizes and we can make them to suit your aplication)

braided hose kits available please contact us with the lengths you require and we can price the kit up  (available in many colours)

Chassis side bar clamps fuel  tank
Chassis side bar clampsfuel tank

Chassis side bar clamps , used to hold side bars together on new style chassis , price  per pair

alloy fuel tanks made to order ( please contact us with sizes )

Master cylinder New style anti roll bar clevises
Master cylinderNew style anti roll bar clevises

Brake or clutch master cylinders

new style anti roll bar clevis , only available for 5/8 roll bars per pair

Q /release hex Rear Shock Mounts
Q /release hex Rear Shock Mounts

Quick release hex for steering wheel

new rear shock mounts , can be mounted either way up allowing for more adjustability ( price per pair)

steel pedal set Steering rack
steel pedal setSteering rack

steel pedal set 

steering rack , centre seat 

Steering rack clamps
Steering rack clamps

a set of steering rack clamps to fit our rack (will fit other manufacturers racks )

 you can now place orders over the phone